Fusion FWD L4-2.3L VIN Z (2007)
Impact Sensor: Service and Repair
Front Impact Severity Sensor
FRONT IMPACT SEVERITY SENSOR
Removal and Installation
WARNING:
-
Always wear safety glasses when repairing an air bag supplemental restraint system (SRS) vehicle and when handling an air bag module.
This will reduce the risk of injury in the event of an accidental deployment.
-
Vehicle sensor orientation is critical for proper system operation. If a vehicle equipped with an air bag supplemental restraint system SRS
is involved in a collision, inspect the sensor mounting bracket and wiring pigtail for deformation. Install and properly position the sensor
or any other damaged SRS components whether or not the air bag is deployed.
-
To reduce the risk of personal injury, do not use any memory saver devices.