Fusion FWD L4-2.3L VIN Z (2007)
3. If equipped, remove the wheel speed sensor harness bolt and position the wheel speed sensor aside.
4. NOTE: Apply the brake to keep the halfshaft from rotating.
Remove and discard the halfshaft nut.
5. CAUTION: Do not allow the caliper and anchor plate assembly to hang from the brake hose or damage to the hose can occur.
Remove the bolts and position the caliper and anchor plate assembly aside.
-
Support the caliper and anchor plate assembly using mechanic's wire.
6. Remove the 2 brake disc bolts and the brake disc.
7. Using the special tool, separate the halfshaft from the wheel hub.
8. Remove and discard the upper ball joint nut.
9. Using the special tool, separate the upper ball joint from the wheel knuckle.
