Fusion FWD L4-2.3L VIN Z (2007)
3. Tighten the upper arm-to-body bolts to 48 Nm (35 ft. lbs.) and remove the drill bit.
4. Position the shock and spring assembly and install the 3 shock upper mount nuts.
-
Tighten to 30 Nm (22 ft. lbs.).
5. Position the upper ball joint and install the nut.
-
Tighten to 48 Nm (35 ft. lbs.).
6. If equipped, position the wheel speed sensor harness and install the bolt.
-
Tighten to 23 Nm (17 ft. lbs.).
7. If equipped, position the wheel speed sensor and install the bolt.
-
Tighten to 23 Nm (17 ft. lbs.).
8. Check and, if necessary, align the front end.