ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Front Steering Knuckle > < Control Arm|Front|Page 6341
Page 5
background image

jack to raise the suspension until the distance between the center of the hub and the lip of the fender is equal to 395 mm (15.55 inch).

CAUTION: Do not fully tighten the cam adjuster nut until the rear alignment has been checked and, if necessary, adjusted.

NOTE: Install the cam bolt and the cam adjuster with the cam facing upward.

To install, reverse the removal procedure.

Front Steering Knuckle > < Control Arm|Front|Page 6341