Fusion FWD L4-2.3L VIN Z (2007)
5. Clean the silicone from the transaxle fluid pan and transaxle case surfaces thoroughly with metal surface cleaner.
Installation
1. NOTE: Do not use more than the specified amount of sealer on the pan or internal transaxle damage could occur.
Apply a bead 1-1/2 millimeters thick of sealer to the transaxle on the fluid pan sealing surface.
2. Install the transaxle fluid pan.
-
Tighten to 7 Nm (62 inch lbs.).
3. Fill the transaxle with clean automatic transmission fluid.