ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Shifter A/T|Service and Repair > < A/T - Key Stuck in Ignition/Shifter Binding
Page 2
background image

NOTE

WHEN REINSTALLING THE SHIFT KNOB DO NOT REUSE THE SCREWS. REMOVE AND DISCARD THE SCREWS. INSTALL TWO
NEW SCREWS AND TIGHTEN TO 18 LB-IN (2 N.m). DO NOT OVER TIGHTEN THE SCREWS OR DAMAGE MAY OCCUR.

NOTE

IF OVERRIDE CAP IS DAMAGED DURING REPAIR, IT IS AVAILABLE SEPARATELY.

Parts Block

WARRANTY STATUS: Eligible Under Provisions Of New Vehicle Limited Warranty Coverage 
IMPORTANT

Warranty coverage limits/policies are not altered by a TSB. Warranty coverage limits are determined by the identified causal part.

OPERATION

DESCRIPTION

TIME

071407A

2006-2007 Fusion, Milan

0.3 Hr.

And 2006 Zephyr: Replace
Knob Assembly, Includes
Time To Diagnose And
Verify Repair (Do Not Use
With 04536A, 04536B,
7213A)

071407B

2006-2007 Fusion, Milan

0.4 Hr.

and 2006 Zephyr: Replace
Bezel Assembly Includes
Time To Diagnose And
Verify Repair (Do Not Use
With 04536A, 04536B,
7213A)

DEALER CODING

CONDITION

BASIC PART NO.

CODE

7213

69

Disclaimer

Shifter A/T|Service and Repair > < A/T - Key Stuck in Ignition/Shifter Binding