Fusion FWD L4-2.5L Hybrid (2010)
Driver/Vehicle Information Display: Removal and Replacement
Message Center Switch
Removal and Installation
1. Remove the LH instrument panel trim.
2. NOTE: Once the top of the headlamp switch bezel is released from the instrument panel, rotate the headlamp switch bezel and switches out from
the top of the bezel to release lower retaining tabs.
Press the upper headlamp bezel retaining clips from the back of the bezel and push the headlamp switch out of the instrument panel.
-
Disconnect the electrical connectors.
3. Press the retaining tabs and remove the message center switch.
4. To install, reverse the removal procedure.
