Fusion FWD L4-2.5L Hybrid (2010)
Grille: Service and Repair
Radiator Grille Support
Radiator Grille Support
1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Vehicle Jacking and Lifting.
2. NOTE: Applies to 3.5L engines only.
Remove the Air Cleaner (ACL) outlet pipe and ACL assembly. For additional information, refer to Fuel Delivery and Air Induction.
3. Disconnect the hood security switch electrical connector.
4. Remove the windshield washer reservoir retaining bolt.
-
To install, tighten to 7 Nm (62 lb-in).
5. Remove the A/C line retaining bolt.
-
To install, tighten to 6 Nm (53 lb-in).
6. Remove the front headlamps.
7. NOTE: This step is necessary to relieve stress from the radiator grille support prior to removal.