Fusion FWD L4-2.5L Hybrid (2010)
Sunroof / Moonroof Frame: Service and Repair
Roof Opening Panel Frame
Roof Opening Panel Frame
Removal and Installation
1. Remove the headliner.
2. Disconnect the 4 roof opening panel drain hoses.
3. Disconnect the electrical connector.
4. Remove the 8 roof opening panel frame bolts and remove the roof opening panel frame.
-
To install tighten to 12 Nm (106 lb-in).
5. To install, reverse the removal procedure.
-
Initialize the roof opening panel motor. For additional information, refer to Roof Opening Panel Motor Initialization See: Testing and
Inspection/Programming and Relearning.