Fusion FWD L4-2.5L Hybrid (2010)
13. Release the cushion trim cover retainer from around the safety belt buckle and separate the hook-and-loop strip.
14. Release the first cushion trim cover J-clip from the rear of the cushion frame.
15. Disconnect and detach the electrical connectors.
-
Slide and disengage the side air bag module electrical connector locking clip, release the tab and disconnect the side air bag module electrical
connector. Detach any pin-type retainers.
-
If equipped, disconnect the heated seat electrical connector and detach any pin-type retainers.
16. Detach the side air bag bolt cover.
17. Remove the bolt, lift up and out to separate the side air bag module from the seat backrest.
18. Slide and disengage the side air bag module electrical connector locking clip, release the tab and disconnect the side air bag module electrical
connector.
19. Detach and route out the side air bag wire harness.
20. Route out the side air bag wire harness from the seat track and cushion.
