Fusion FWD L4-2.5L Hybrid (2010)
Sound Proofing / Insulation: Description and Operation
Sound Deadeners and Insulators
SOUND DEADENERS AND INSULATORS
NOTICE:
-
Mastic is made of a combustible material and should be removed prior to carrying out welding procedures to the area. Heat zones from
welding near the mastic may cause the mastic material to burn.
-
Corrosion protection must be restored to the area AFTER the mastic material is applied. Corrosion protection products contain wax and
loss of adhesion may occur.
NOTE:
-
To restore the vehicle to design intent, missing or damaged sound deadeners and insulators should be installed with the correct service replacement
component.
-
The following illustrations serve as a reference to indicate mastic sound deadener locations. Sound deadener material is applied from the factory in
a pumpable form. Additional insulators and sound deadeners are used beyond those indicated in the illustration.
Interior Floor Pan
Interior Floor Pan
Exterior Floor Pan