Fusion FWD L4-2.5L Hybrid (2010)
Parking Brake Cable: Service and Repair
Parking Brake Cable - Rear
Removal and Installation
NOTE: Do not use oil or grease-based lubricants on the isolators.
1. Remove the floor console. For additional information, refer to Instrument Cluster / Carrier &/or Interior Moulding / Trim.
2. Loosen the parking brake control adjusting nut.
3. Disconnect the rear parking brake cables from the equalizer.
4. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Vehicle Jacking and Lifting.
