Fusion FWD L4-2.5L Hybrid (2010)
Brake Switch (Cruise Control): Description and Operation
ENGINE CONTROL COMPONENTS
Brake Pedal Position (BPP) Switch
The BPP switch is a normally open switch that, when closed, sends a signal to the PCM when the brake pedal is applied. The PCM strategy uses this
signal input to aid the PCM in determining the correct function and operation of the vehicle speed control, the electronic throttle control (ETC), and
the transaxle and regenerative braking systems. The BPP switch is hardwired to the PCM and supplies positive battery voltage (+12 volts) when the
brake pedal is applied. When the brake pedal is released, the BPP switch opens and no battery voltage input is sent to the PCM.
Brake Pressure Switch
The brake pressure switch used for vehicle speed control deactivation is a normally closed switch, which supplies positive battery voltage (+12 volts)
to the PCM when the brake pedal is released. When the brake pedal is applied, the normally closed switch opens and power is removed from the brake
pressure switch circuit to the PCM.
The normally closed brake pressure switch, along with the normally open BPP switch, is used by the PCM strategy for a brake pedal rationality test.
The PCM strategy looks for each switch to change states when the brake pedal is applied and released. If a failure occurs in one or both of the brake
pedal inputs a diagnostic trouble code is set and the PCM misfire on board diagnostic (OBD) monitor is disabled.
