Fusion FWD L4-2.5L Hybrid (2010)
7. NOTICE: The Camshaft Alignment Plate 303-465 is for camshaft alignment only. Using this tool to prevent engine rotation can result in
engine damage.
NOTE: The camshaft timing slots are offset. If the Camshaft Alignment Plate cannot be installed, rotate the crankshaft one complete revolution
clockwise to correctly position the camshafts.
Install the Camshaft Alignment Plate in the slots on the rear of both camshafts.
8. Remove the engine plug bolt.
9. Install the Crankshaft TDC Timing Peg.
10. NOTICE: Only hand-tighten the bolt or damage to the front cover can occur.
Install a standard 6 mm x 18 mm bolt through the crankshaft pulley and thread it into the front cover.
11. Remove the lower front cover timing hole plug from the engine front cover.
