Fusion FWD L4-2.5L Hybrid (2010)
Camshaft Gear/Sprocket: Specifications
NOTE: If new parts are installed, transfer the reference marks made during disassembly to the new parts.
Position the camshaft in a soft-jawed vise. Install the camshaft phaser and sprocket and the bolt.
-
Align the reference marks on the camshaft phaser and sprocket and the camshaft. Tighten the bolt to 72 Nm (53 lb-ft).
Position the exhaust camshaft drive gear in the timing chain and install the gear and bolt on the exhaust camshaft.
-
Hand-tighten the bolt
Using the flats on the camshaft to prevent camshaft rotation, tighten the exhaust camshaft drive gear bolt to 72 Nm (53 lb-ft).
