ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

All Technical Service Bulletins for Control Module HVAC:|09-17-4 > < A/C - Stuck In 'HOT' Mode With A/C ON|Page 6635
Page 1
background image

Control Module HVAC: All Technical Service Bulletins
A/C - A/C Turns Off By Itself

TSB 09-24-5

12/14/09

ELECTRONIC MANUAL TEMPERATURE CONTROL
(EMTC) RESETS TO THE ON POSITION - BUILT ON
OR BEFORE 3/18/2009

FORD:
2010 Fusion

MERCURY:
2010 Milan

ISSUE
Some 2010 Fusion and Milan vehicles equipped with EMTC and built on or before 3/18/2009 may exhibit an intermittent concern of EMTC or A/C
turning on by itself on initial key cycle in Run or Start position. This only occurs when a driver turns off the A/C button or EMTC manually prior to
cycling the key in the off position. This condition is not related to the EMTC hardware or ignition switch functionality. This is caused by the software
strategy within the EMTC control head.

ACTION
Reprogram the climate control module to the latest calibration using Integrated Diagnostic System (IDS) release 63.02 and higher. This new calibration
is not included in the VCM 2009.9 DVD. Calibration files may also be obtained at the website.

WARRANTY STATUS: Eligible Under Provisions Of New Vehicle Limited Warranty Coverage 
IMPORTANT: Warranty coverage limits/policies are not altered by a TSB. Warranty coverage limits are determined by the identified causal part.

OPERATION

DESCRIPTION

TIME

092405A

2010 Fusion, Milan:

0.3 Hr.

Reprogram The Climate
Control Module (Do Not
Use With Any Other Labor
Operations)

DEALER CODING

CONDITION

BASIC PART NO.

CODE

19980

04

Disclaimer

All Technical Service Bulletins for Control Module HVAC:|09-17-4 > < A/C - Stuck In 'HOT' Mode With A/C ON|Page 6635