Fusion FWD L4-2.5L Hybrid (2010)
10. Repeat Steps 4 through 9 until clear, bubble free fluid comes out.
-
Refill the brake master cylinder reservoir as necessary.
-
Remove the rubber hose and install the bleeder screw cap.
11. Remove the 2 guide pin bolts and the shop towel.
12. Install the outer brake pad.
13. Position the brake caliper and install the 2 guide pin bolts.
-
Tighten to specifications, refer to Specifications.
14. Install the wheel and tire. For additional information, refer to Wheels and Tires.