Fusion FWD L4-2.5L Hybrid (2010)
Drive Belt: Service and Repair
Accessory Drive Belt
Accessory Drive Belt
Removal and Installation
1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Vehicle Jacking and Lifting.
2. Remove the 4 screws and position the RH fender splash shield aside.
3. Remove the 6 pin-type retainers and the RH splash shield.
4. Remove the A/C hose retainer bracket bolt.
-
To install, tighten to 6 Nm (53 lb-in).
5. Rotate the accessory drive belt tensioner counterclockwise and remove the accessory drive belt.
6. To install, reverse the removal procedure.
