Fusion FWD L4-2.5L Hybrid (2010)
Auxiliary Power Outlet: Service and Repair
High Voltage Converter/Inverter
Alternating Current (AC) Powerpoint
Alternating Current (AC) Powerpoint
Removal and Installation
1. Disconnect the 12-volt battery. For additional information, refer to Battery.
2. NOTICE: Make sure that the rear of the floor console is lifted away from the floor as specified. Failure to follow this procedure will
result in damage to the floor console and the tabs at the top of the floor console end cover.
Remove the floor console rear screws and lift the floor console about 25 mm (0.984 in) away from the floor.
3. Remove the floor console end cover by pulling the cover away at the bottom and rotating out. Lower the cover 7-13 mm (0.275-0.511 in) to clear
the tabs on the top of the floor console end cover.