Fusion FWD L4-2.5L Hybrid (2010)
19. Remove the lower control arm-to-strut through bolts and flagnuts.
20. Remove the 2 outer tie-rod end cotter pins and nuts.
-
Discard the cotter pins.
21. NOTICE: Do not use a hammer to separate the outer tie-rod end from the wheel knuckle or damage to the wheel knuckle may result.
Using the Ball Joint Separator, separate the outer tie-rod ends from the knuckle.
22. NOTE: Left side shown.
Remove the front lower arm-to-subframe bolts.
-
Discard the bolts.
