Fusion FWD L4-2.5L Hybrid (2010)
Transmission Speed Sensor: Service and Repair
Aisin AW21 - Turbine Shaft Speed (TSS) Sensor
Turbine Shaft Speed (TSS) Sensor
Removal
1. Remove the main control valve body. For additional information, refer to Main Control Valve Body See: Valve Body/Service and Repair/Aisin
AW21 - Main Control Valve Body.
2. Remove the bolt and the Turbine Shaft Speed (TSS) sensor.
Installation
1. Lubricate the O-ring with clean automatic transmission fluid and install the TSS sensor.
-
Tighten to 12 Nm (106 lb-in).
2. Install the main control valve body. For additional information, refer to Main Control Valve Body See: Valve Body/Service and Repair/Aisin
AW21 - Main Control Valve Body.