Fusion FWD L4-2.5L Hybrid (2010)
Clutch Disc: Removal and Replacement
Clutch Disc and Pressure Plate
Removal
Clutch disc and clutch pressure plate
1. Remove the transaxle. For additional information, refer to Manual Transmission/Transaxle.
2. Inspect the clutch pressure plate.
-
Check the diaphragm spring fingers for discoloration, scoring, bent or broken segments.
-
Using the Dial Indicator Gauge with Holding Fixture, rotate the flywheel and check for spring ends that are higher or lower than the rest.
-
The specification is 0.6 mm (0.023 in) maximum.
