Fusion FWD L4-2.5L Hybrid (2010)
Transmission Mount: Service and Repair
Transaxle Support Insulator - Anti-Roll
Transaxle Support Insulator - Anti-Roll
Removal
1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Vehicle Jacking and Lifting.
2. Remove the 7 screws and the underbody cover.
3. Remove the 2 bolts and remove the roll restrictor.
Installation
1. Position the roll restrictor in place and install the 2 bolts.
-
Tighten to 90 Nm (66 lb-ft).
