Fusion FWD L4-2.5L Hybrid (2010)
Control Module: Removal and Replacement
Transmission Control Module (TCM)
Removal
1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Vehicle Jacking and Lifting.
2. Disconnect the battery ground cable. For additional information, refer to Battery.
3. Remove the Air Cleaner (ACL) assembly. For additional information, refer to Fuel Delivery and Air Induction.
4. Disconnect the selector lever cable end.
5. Disconnect the Transmission Control Module (TCM) electrical connector.
6. Remove the manual control lever nut.
7. Remove the manual control lever.
8. Remove the bolts and remove the TCM.
Installation