Fusion FWD L4-2.5L Hybrid (2010)
Front Door Window Glass Weatherstrip: Service and Repair
Door Glass Top Run - Front
Door Glass Top Run - Front
Removal and Installation
NOTE: The front window motor must be de-initialized, then initialized whenever the LH front or RH front (MKZ only) window motor is removed from
the window regulator drum housing, a new window regulator is installed, a new window glass is installed, a new top run is installed or for any operation
in which grease or lubricants are applied to the window regulator or glass run.
1. Remove the front door window glass. For additional information, refer to Window Glass - Front Door See: Service and Repair/Window Glass -
Front Door.
2. Remove the front door window glass inner weatherstrip.
3. Remove the front door glass top run.
4. To install, reverse the removal procedure.
-
The front window motor must be de-initialized, then initialized whenever the LH front or RH front (MKZ only) window motor is removed
from the window regulator drum housing, a new window regulator is installed, a new window glass is installed, a new top run is installed or for
any operation in which grease or lubricants are applied to the window regulator or glass run. For additional information, refer to Window
Motor Initialization See: Service and Repair.
