Fusion FWD L4-2.5L Hybrid (2010)
Rain Sensor: Service and Repair
Rain Sensor
Removal and Installation
1. Remove the rain sensor cover.
-
Pull the rain sensor cover outward off the windshield.
2. Disconnect the rain sensor electrical connector.
3. NOTE: Lightly press the rain sensor against the glass to relieve clip tension.
Using a flat-blade screwdriver, release the 2 rain sensor retaining clips from the windshield mounted bracket and remove the rain sensor.
4. To install, reverse the removal procedure.
-
Make sure to align the rain sensor alignment tab to the alignment slot on the rain sensor mount.
