Fusion FWD V6-3.0L (2009)
Alarm System Transmitter: Service and Repair
Anti-Theft - Passive Anti-Theft System (PATS) - Transceiver
Passive Anti-Theft System (PATS) Transceiver
NOTE: MKZ shown, Fusion and Milan similar.
Removal and Installation
1. Remove the 3 screws and the lower steering column shroud.
2. Position the upper steering column shroud aside.
3. Disconnect the electrical connector and remove the Passive Anti-Theft System (PATS) transceiver.
4. NOTE: Replacement of the PATS transceiver does not require the PATS keys to be programmed into the Instrument Cluster (IC) again.
To install, reverse the removal procedure.
