Fusion FWD V6-3.0L (2009)
Sunroof / Moonroof Panel: Service and Repair
Roof Opening Panel Glass
Roof Opening Panel Glass
1. Open the roof opening panel to the VENT position.
2. Remove the 4 roof opening panel glass screws.
-
To access the glass screws, unclip the top portion of the concertina blind and position aside as shown.
-
To install, tighten to 6 Nm (53 lb-in).
3. To install, reverse the removal procedure.
-
Verify that the roof opening panel glass is centered and aligned before tightening the roof opening panel glass screws. For additional
information, refer to Roof Opening Panel Alignment See: Adjustments/Roof Opening Panel Alignment.
-
Initialize the roof opening panel motor. For additional information, refer to Roof Opening Panel Motor Initialization See: Testing and
Inspection/Programming and Relearning.
