Fusion FWD V6-3.0L (2009)
4. Connect the MAP sensor electrical connector and the pin-type retainer.
5. Install the EGR tube-to-EGR valve nut.
-
Tighten to 40 Nm (30 lb-ft).
6. Connect the EGR valve electrical connector.
7. Connect the PCV tube to the intake manifold.
8. Connect the vacuum tube to the intake manifold.
9. Install the vacuum tube clamp bolt.
-
Tighten to 10 Nm (89 lb-in).
10. Connect the EVAP tube to the intake manifold.
11. NOTE: Install a new TB gasket.
Install the gasket, TB and 4 bolts.
-
Tighten to 10 Nm (89 lb-in).
12. Connect the TB electrical connector.
13. Install the air cleaner outlet pipe.
