Fusion FWD V6-3.0L (2009)
Intake Manifold: Service and Repair
Lower Intake Manifold
Lower Intake Manifold
Removal
WARNING: Do not smoke, carry lighted tobacco or have an open flame of any type when working on or near any fuel-related component.
Highly flammable mixtures are always present and may be ignited. Failure to follow these instructions may result in serious personal injury.
WARNING: Before working on or disconnecting any of the fuel tubes or fuel system components, relieve the fuel system pressure to prevent
accidental spraying of fuel. Fuel in the fuel system remains under high pressure, even when the engine is not running. Failure to follow this
instruction may result in serious personal injury.
1. Release the fuel system pressure.
2. Disconnect the battery ground cable.
3. Remove the upper intake manifold. For additional information, refer to Upper Intake Manifold See: Service and Repair/Removal and
Replacement/Upper Intake Manifold.
4. Disconnect the fuel supply tube quick connect coupling from the fuel rail.
5. Detach the 2 wiring harness retainers from the RH and LH valve cover stud bolts.
6. Detach the 3 pin-type retainers from the fuel rail.
7. Disconnect the 6 fuel injector electrical connectors.
