Fusion FWD V6-3.0L (2009)
Front Crankshaft Seal: Service and Repair
Crankshaft Front Seal
Removal
1. With the vehicle in NEUTRAL, position it on a hoist.
2. Remove the crankshaft pulley. For additional information, refer to Crankshaft Pulley See: Cylinder Block Assembly/Harmonic Balancer -
Crankshaft Pulley/Service and Repair.
3. Using the Oil Seal Remover, remove and discard the crankshaft front seal.
Installation
1. NOTE: Clean all sealing surfaces with metal surface prep.
Apply clean engine oil to the seal lip and seal bore before installing the seal.
2. Using the Crankshaft Vibration Damper Installer and the Front Cover Oil Seal Installer, install a new crankshaft front seal.
