Fusion FWD V6-3.0L (2009)
27. From under the rear of the driver seat, slide and disengage the driver seat side air bag module electrical connector locking clip, and then release
the tab and disconnect the driver seat side air bag module electrical connector.
28. Install RCM fuse 25 (7.5A) to the SJB.
29. Connect the battery ground cable.
Reactivation
All vehicles
1. Remove RCM fuse 25 (7.5A) from the SJB.
2. Disconnect the battery ground cable and wait at least one minute.
3. Connect the driver seat side air bag module electrical connector and then slide and engage the seat side air bag electrical connector locking clip.
4. Connect the LH side air curtain module electrical connector.
5. Install the LH C-pillar trim cover and retainer.
6. Install the LH C-pillar trim cover retainer cap.
7. Connect the RH side air curtain module electrical connector.
