Fusion FWD V6-3.0L (2009)
NOTE: The headlamp bulb should not be removed from the headlamp until just before a new bulb is installed. Removing the bulb for an extended
period of time may affect headlamp bulb performance. Contaminants may enter the headlamp where they can settle on the lens and reflector. Never turn
on the headlamps with the bulb removed from the headlamp.
NOTE: Make sure the headlamp switch and the ignition switch are in the OFF position.
Low beam bulb (vehicles equipped with a 2.3L or 3.0L engine)
1. Remove the air cleaner intake pipe.
Low beam or high beam bulb
2. Remove the headlamp bulb protective cover.
3. Remove the headlamp bulb.
-
Disconnect the electrical connector.
4. To install, reverse the removal procedure.
-
Make sure the headlamp bulb protective cover is completely sealed.
