ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 3017 > < Initial Inspection and Diagnostic Overview|Page 3015
Page 48
background image

-

Is the resistance less than 5 ohms?

Yes

GO to R14.

No

CONNECT the negative battery cable. GO to R50.

-------------------------------------------------
R14 VERIFY VEHICLE EQUIPMENT - HVAC MODULE

-

Inspect the vehicle for a HVAC module.

-

Is the vehicle equipped with a HVAC module?

Yes

GO to R15.

No

GO to R16.

-------------------------------------------------
R15 CHECK THE MS-CAN (+) AND MS-CAN (-) CIRCUITS FOR A SHORT TOGETHER WITH THE HVAC MODULE
DISCONNECTED

-

Disconnect: HVAC Module C228a (Single-Zone) or C2356a (Dual-Zone).

-

Measure the resistance between the DLC C251-3, circuit VDB06 (GY/OG), harness side and the DLC C251-11, circuit VDB07 (VT/OG), harness
side.

-

Is the resistance less than 5 ohms?

Yes

GO to R16.

No

CONNECT the negative battery cable. GO to R51.

-------------------------------------------------
R16 VERIFY VEHICLE EQUIPMENT - PAM

-

Inspect the vehicle for a Parking Aid Module (PAM).

-

Is the vehicle equipped with a PAM?

Yes

GO to R17.

No

Initial Inspection and Diagnostic Overview|Page 3017 > < Initial Inspection and Diagnostic Overview|Page 3015