Fusion FWD V6-3.0L (2009)
4. Rotate the primary locking tab to the fully opened position and squeeze the secondary locking tabs to release the locking mechanism.
5. Push the locking mechanism outward and release the tube.
6. Remove the quick connect coupling from the tube.
Connect - Type III
1. NOTE: Apply clean engine oil to the O-ring seals.
Install the quick connect coupling onto the tube until it is fully seated.
2. Depress the retainer clip until it is flush with the quick connect coupler housing and is fully seated on the tube.
3. NOTE: Make sure the retainer clip is fully seated and locked onto the tube by pulling on the quick connect coupling.
