Fusion FWD V6-3.0L (2009)
Intake Air Duct: Service and Repair
Air Cleaner Outlet Pipe
Air Cleaner Outlet Pipe
Removal and Installation
1. Disconnect the crankcase vent tube and vacuum tube from the air cleaner outlet pipe.
2. Loosen the air cleaner outlet pipe-to-air cleaner cover clamp.
-
To install, tighten to 3 Nm (27 lb-in).
3. Loosen the air cleaner outlet pipe-to-Throttle Body (TB) clamp.
-
Remove the air cleaner outlet pipe.
-
To install, tighten to 5 Nm (44 lb-in).
4. NOTE: The air cleaner outlet pipe should be securely sealed to prevent unmetered air from entering the engine.
To install, reverse the removal procedure.
