Fusion FWD V6-3.0L (2009)
NOTE: During air bag module installation, make sure all the passenger air bag cover clips are fully seated in the instrument panel.
Install the passenger air bag module in the instrument panel.
3. Install the 2 passenger air bag module bolts.
-
Tighten to 8 Nm (71 lb-in).
MKZ
4. Align the 2 clips and install the instrument panel trim panel.
5. Install the 5 RH instrument panel trim panel nuts.
6. Install the instrument panel end panel.
All vehicles
7. Attach the door damper cable and close the glove compartment door.
8. Repower the SRS. For additional information, refer to Supplemental Restraint System (SRS) Depowering and Repowering See: Air Bag(s)
Arming and Disarming/Service and Repair/Supplemental Restraint System (SRS) Depowering and Repowering in the General Procedures portion.