Fusion FWD V6-3.0L (2009)
Seat Belt Tension Sensor: Description and Operation
Safety Belt System
Safety Belt Retractor and Pretensioner
The front safety belt retractors are equipped with pretensioners that operate as part of the Supplemental Restraint System (SRS). The pretensioner is a
pyrotechnic device that deploys when activated by the Restraints Control Module (RCM) to remove excess safety belt webbing from the shoulder and lap
safety belt in the event of an impact. If a deployment of the safety belt retractor and pretensioners occurs, a new assembly must be installed. Refer to
Safety Belt Retractor and Pretensioner See: Restraint Systems/Seat Belt Systems/Seat Belt Retractor/Service and Repair/Safety Belt Retractor and
Pretensioner.
For safety belt retractor and pretensioner diagnostic and disposal information, refer to Air Bag Systems.