Fusion FWD V6-3.0L (2009)
5. Clean the silicone from the transmission fluid pan and transaxle case surfaces thoroughly with metal surface cleaner.
Installation
1. NOTE: Do not use more than the specified amount of sealer on the pan or internal transaxle damage could occur.
Apply a 1.5 mm (0.059 in) thick bead of sealer to the transaxle on the transmission fluid pan sealing surface.
2. Install the transmission fluid pan.
-
Tighten to 7 Nm (62 lb-in).
3. Fill the transaxle with clean transmission fluid.