Fusion FWD V6-3.0L (2009)
Removal
All vehicles
1. With the vehicle in NEUTRAL, position it on a hoist.
2. Remove the battery and battery tray.
3. Remove the 4 screws and position the LH fender splash shield aside.
4. Remove the 6 pin-type retainers and the LH front structure-to-subframe splash shield.
5. Remove the lower 2 transaxle insulator-to-frame bolts.
3.0L engine
6. Install the Engine Lifting Bracket and Universal Adapter Bracket "L" hook on the LH side of the engine.
7. Install the Engine Support Bar to support the engine.