Fusion FWD V6-3.0L (2009)
3. Install the suction cover gasket, cover and loosely install the 2 bolts.
4. Tighten the 8 bolts to 10 Nm (89 lb-in) in the sequence shown.
5. Lubricate the O-ring with clean automatic transmission fluid and install the TFT sensor.
-
Tighten to 10 Nm (89 lb-in).
6. Connect the 2 speed sensor wires.
7. Connect the wire harness to the solenoids.
1. Install the wire harness into the clamps.
-
Connect the 8 solenoid connectors and the 2 speed sensor connectors.
