Fusion FWD V6-3.0L (2009)
6. Shift Solenoid E (SSE), wire color (RD).
5. NOTICE: Note the 2 accumulators and springs may fall out of the case during the main control valve body removal.
NOTE: Note the locations of the 2 long bolts.
Remove the 14 main control valve body bolts and remove the main control valve body and solenoids as an assembly.
6. NOTE: Each accumulator is equipped with 2 springs. All 4 springs are different sizes.
NOTE: Note the size and location of the accumulator springs to aid assembly.
NOTE: Note the shape of each piston and the piston bore from which the piston was removed. The shape and size will vary depending on
application. The piston must be installed in its correct bore during assembly.
Remove the accumulator pistons and springs.
Shift solenoids A, B, C, D, E and Pressure Control Solenoid A (PCA)
7. Remove the 4 shift solenoid bracket bolts and remove the bracket. Remove the affected solenoid.
8. Remove the bolts and remove affected solenoid.
