Fusion FWD V6-3.0L (2009)
Pressure Plate: Removal and Replacement
Clutch Disc and Pressure Plate
Removal
1. Remove the transaxle.
2. Inspect the clutch pressure plate.
-
Check the diaphragm spring fingers for discoloration, scoring, bent or broken segments.
-
Using the Dial Indicator Gauge with Holding Fixture, rotate the flywheel and check for spring ends that are higher or lower than the rest.
-
The specification is 0.6 mm (0.02 in) maximum.
3. Using the Flywheel Holding Tool, lock the flywheel to the engine.
