ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
Expansion Tank - Remove And Install (24 284 0) > < 324-01 Cooling System - Petrol Engines|Description and Operation

Galaxy 1995 (02.1995-03.2000)

Cooling System - Drain And Refill (24 122 0)Galaxy 1995 (02/1995-03/2000)
Print Print
Removal and Installation
Drain

WARNING:

When releasing the system pressure, cover the cap with a thick cloth to prevent the possibility of scalding. Failure to follow this instruction can result in personal.
1. Release the cooling system pressure by slowly turning the expansion tank cap a quarter turn.
   Remove the cap when all the pressure has been released.
2. Raise the vehicle.

3. Remove the undershield.
2.0i and 2.3i DOHC only

WARNING:

Extreme care is needed when detaching the bottom hose if scalding is to be avoided. Be prepared for the coolant to drain from the system in an uncontrolled manner. Failure to follow this instruction can result in personal injury.
4. Detach the bottom hose from the radiator.
   Drain the coolant into a suitable container.
2.8i CD‐V6 only

WARNING:

Extreme care is needed when detaching the bottom hose if scalding is to be avoided. Be prepared for the coolant to drain from the system in an uncontrolled manner. Failure to follow this instruction can result in personal injury.
5. Detach the bottom hose from the radiator.
   Drain the coolant into a suitable container.
6. Refit the bottom hose when the coolant has finished draining.
7. Refit the undershield.
8. Lower the vehicle.
Refill

9. Refill the expansion tank up to the MAX mark and replace the cap.
10. Start the engine and run until the normal operating temperature is achieved. Check for leaks and then recheck the coolant level.

Expansion Tank - Remove And Install (24 284 0) > < 324-01 Cooling System - Petrol Engines|Description and Operation