ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Motor ? Headlamp Levelling ? Remove and Install (32 650 0) > < Pivot Shaft ? Windscreen Wiper ? Remove and Install (32 563 0)
Reservoir ‐ Windscreen Washer ‐ Remove and Install (32 622 0)Galaxy 1995 (02/1995-03/2000)
Print Print
Removal and Installation
Remove

1. Remove the front bumper as described in Operation No. 43 423 0.
2. Remove the left‐hand headlamp cover.
3. Remove the cap from the washer reservoir.
4. Unscrew the bolt of the fluid filler tube.

5. Pull out the plugs and disconnect the hoses.
1. Windscreen washer pump connector.
2. Fluid level sensor connector.
3. Disconnect the hoses from the windscreen washer pump.

6. Remove the windscreen washer reservoir.
Install

NOTE:

Torque: refer to ”General Specifications".

7. Install the components in the reverse order.

Motor ? Headlamp Levelling ? Remove and Install (32 650 0) > < Pivot Shaft ? Windscreen Wiper ? Remove and Install (32 563 0)