Granada L4-140 2.3L VIN A 2-bbl (1982)
Figure 9
8.
Cut a 31-inch length of 3/8 inch vacuum line and install one end to the remaining 3/8 inch nipple on the altitude compensator and the other end to
a tee. Cut a 1-1/2 inch of 3/8 inch vacuum line and install the other tee in line with the first tee (see Figure 9). Cap the open 3/8 inch nipple on the
second tee.
9.
Cut two pieces of 1/4 inch vacuum line 1-1/2 inch long, install these to the two 1/4 inch nipples of the two tees and connect these to the colored
end of the two check valves.
10.
Cut the two 1/4 inch hoses going to the carburetor and connect them to the black ends of the two check valves.
PART NUMBER
PART NAME
CLASS
