Granada L4-140 2.3L VIN A 2-bbl (1982)
Fig. 7 Using hook-type tool to remove oil seal
Fig. 8 Using special driver to install oil seal
Fig. 12 Axle Shaft Bearing Identification. 1989-91 Crown Victoria & Grand Marquis
FORD INTEGRAL CARRIER w/C-LOCK TYPE AXLE RETENTION
1.
Raise and support rear of vehicle.
2.
Remove wheel and tire assembly and brake drum.
3.
Remove rear axle housing cover and drain lubricant.
4.
Remove differential pinion lock screw and differential pinion shaft.
5.
Remove wheel speed sensor, if equipped. Damage to sensor may occur if sensor is not removed before axle shaft.
6.
Push axle shafts inward and remove C-locks, Fig. 3.
7.
Remove axle shaft from housing using care not to damage oil seal.
