ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Wiper Motor|Circuit Breaker Test|Page 2793 > < Wiper Motor|Circuit Breaker Test|Page 2791
Page 4
background image

Fig. 3 Windshield wiper motor current draw test connections. Non-depressed park motor exc. Tempo & Topaz

Non-Depressed Park Type & 1982---87 Lincoln Continental & 1983---87 Cougar & Thunderbird

1.

Disconnect wiper linkage from output arm and electrical connector from motor.

2.

Connect negative lead from ammeter to battery positive post, and alternately connect positive lead from meter to high and low speed terminals on
motor, Fig. 3.

3.

Motor should run in both test positions, and should indicate 3.0 amp draw or less on non-depressed park motor, and 3.5 amp draw or less on
depressed park motor.

4.

If current draw exceeds specifications in either test position, repair or replace motor.

Fig. 5 Windshield wiper motor current draw test connections. Depressed park motor exc. 1982---87 Lincoln Continental & 1983---87 Cougar, Thunderbird & 1984---86 Mark VII

Depressed Park Type Exc. 1982---87 Lincoln Continental & 1983---87 Cougar & Thunderbird
    Motor terminals may be too small to make necessary test connections. If necessary use jumper wires with suitable connector sleeves between motor
and test equipment.

Wiper Motor|Circuit Breaker Test|Page 2793 > < Wiper Motor|Circuit Breaker Test|Page 2791