ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

412-01 Air Distribution and Filtering > < Contaminated Refrigerant Handling
Climate Control System - General Information - Specifications Ikon 1999 (01/2000-)

General Specifications

Specification
A/C Refrigerant R134a, YN-11 WSH-M17B19-A
PAG A/C Refrigerant Oil, F2AZ-19577-AC (MC YN-12b) WSH-M1C231-B
A/C Clutch Air Gap 0.35 mm-0.75 mm
Ford A/C Flushing Solvent, F4AZ-19579-A -
Fluoro-Lite / P Florescent Tracer Dye, 164-R 3712 -

Addition of Air Conditioning Refrigerant Oil

When Installing a New: Specification
Air conditioning condenser Add 30 ml.
Air conditioning evaporator Add 90 ml.
Suction accumulator Fill with the same quantity + 90 ml.
Air conditioning compressor, if the quantity of oil taken from the compressor is less than 90 ml. Add 90 ml.
Air conditioning compressor, if the quantity of oil taken from the compressor is between 90 ml and 150 ml. Fill with the same quantity + 30 ml.
Air conditioning compressor, if the quantity of oil taken from the compressor is greater than 150 ml. Add 150 ml.
Air conditioning lines, if air conditioning has been switched on with defective line. Add 60 ml.
Per evacuation process Add 30 ml.

Air conditioning compressor

Description Type
Air conditioning compressor FS-10

Fixed orifice tube

Description Color
Fixed orifice tube Orange

Torque Specifications

Description Nm lb-ft lb-in
Drive plate to compressor bolt 13 10 -
Air conditioning compressor retaining bolts 25 18 -
Manifold and tube to A/C compressor retaining bolt 20 15 -
Suction accumulator bracket retaining bolts 6 - 53
Pressure cutoff switch 10 - 89

412-01 Air Distribution and Filtering > < Contaminated Refrigerant Handling