LTD L4-140 2.3L VIN A 2-bbl (1984)
Fig. 13 Cooling fan controller terminal identification. Types 5, 6 & 7
7.
Using a test light, check for voltage on 347 or 883 circuit (terminal #6) of cooling fan controller, Fig. 13. If there is no voltage, repair open 347 or
883 circuit. If voltage does exist, proceed to step 8.
8.
Leaving connector attached to controller, ground 57 circuit (terminal #4) of controller. If fan motor runs, repair ground circuit. If fan does not run,
replace controller.
Types 9 Through 12
